- For installation in transfer lines, machine tools and robot stations
- Stainless steel housings
- Stainless steel spindles
- Without valve for central remote control
- Small housing diameter for minimum centre-to-centre spacing
- Ideal for drilling or brushing
Technical attributes
All data related to 6.3 bar working pressure.
Subject to technical alterations.
| Power | 0.16 kW |
|---|---|
| Free speed | 3500 min⁻¹ |
| Drill chuck clamp. range | 1-6 mm |
| DIN taper | B 10 |
| Air consumption | 5.0 ls |
| Weight | 0.62 kg |
| Hose l.D. | 6.0 mm |
| Direction of rotation | clockwise |
| Resistant to stalling | |
| ATEX available | |
| Brake | |
| Stainless steel | |
| non-lubricated | |
| Low speed | |
| Standard | |
| Drive types | Drill chuck |
| Area of application | Drilling + Brushing |
| Design | Cap |
| Speed sensor | |
| Stock level | 3-4 weeks |
Downloads
Find your personal contact
Personal consultation
We would be happy to advise you personally on this product.
Article accessory
| Oil trap | Item number: 60070826 |
| speed throttle 1/8" | Item number: 9361707 |
| bottom flange Ø 31 mm | Item number: 29945285 |
| Lubricating oil 1l | Item number: 09505533 |
| Filter lubrication unit 1/2'' | Item number: 03029274 |
| Filter lubrication unit 1/4'' | Item number: 03029074 |
| Filter lubrication unit 3/8'' | Item number: 03029174 |