- For installation in transfer lines, machine tools and robot stations
- Stainless steel housings
- Stainless steel spindles
- Without valve for central remote control
- Small housing diameter for minimum centre-to-centre spacing
- Ideal for drilling or brushing
Technical attributes
All data related to 6.3 bar working pressure.
Subject to technical alterations.
Power | 0.38 kW |
---|---|
Free speed | 5200 min⁻¹ |
Drill chuck clamp. range | 1-10 mm |
DIN taper | 3/8" x 24 UNF |
Air consumption | 8.5 ls |
Weight | 1.20 kg |
Hose l.D. | 10.0 mm |
Direction of rotation | clockwise |
Resistant to stalling | |
ATEX available | |
Brake | |
Stainless steel | |
non-lubricated | |
Low speed | |
Standard | |
Drive types | Drill chuck |
Area of application | Drilling + Brushing |
Design | Cap |
Speed sensor | |
Stock level | < 10 items |
Downloads
Mr Claus Bay
Personal advice
We would be happy to advise you personally on this product. Just contact us.
Article accessory
Oil trap | Item number: 60070826 |
Drill chuck wrench | Item number: 9369811 |
speed throttle 1/4" | Item number: 9361705 |
bottom flange Ø 42 mm | Item number: 29948415 |
Lubricating oil 1l | Item number: 09505533 |
quick-release drill chuck | Item number: 9369988 |
Filter lubrication unit 1/4'' | Item number: 03029074 |
Filter lubrication unit 1/2'' | Item number: 03029274 |
Filter lubrication unit 3/8'' | Item number: 03029174 |
Drill chuck | Item number: 9376022 |