Robot spindle VSpin 350

Never crash again due to faulty travel paths or contour deviations.
Monitoring and storage of all relevant data of the deburring process: The component with contour, the burr characteristics, the spindle speed, the deflection, the direction in degrees and much more process data.
Seamless verification for system integrators. Increased safety and precision during system setup and ongoing safety and precision in the running process.
Component position and component location can be determined with an accuracy of 0.2mm using the deflection data.
Teaching takes place in a fraction of the time previously required thanks to audio visual feedback.

Technical attributes

Air supply	lubricated
Free speed	35000 min⁻¹
Power	0.38 kW
Type	ER 11
ER collet	6 mm
Radial deflection	+/- 4°
Exhaust air	to front
Fully variable force of compliance	8 - 55 N
Direction of rotation	clockwise
Noise level	79 dB(A)
Air consumption	8.3 ls
Weight	1.80 kg
Connection air supply (hose) ø<br>inside \| outside	10 \| 12
Maximum deflection	3.5°
Deflection force	8 – 50 N
Spindle operating pressure	max. 6.3 bar
Deflection pressure	max. 6.3 bar
Operating Voltage	8.0 V – 13.0 V
Current min. / max. value (Note 1)	0.1 / 0.2 A
Power consumption min. \| max. value	1.1 / 2.2 Watt
Buzzer volume	Max. 85 dB
Data transmission	BLE 4.2 / 5
Max. power BLE	5 (3.3) dBm (mW)
Operating temperature	+10 bis + 50°
Storage temperature	+ 5 bis + 85°
Relative humidity	10 – 80 %, nicht tropfend
Protection class	IP 40
Tolerance deflection	+/- 0,1°
Tolerance angle	+/- 5°
VSpin cable	6 x 0,14 mm -2 LiYCY, 20 Meter
Drive type	Pneumatic
Stock level	No stock

We would be happy to advise you personally on this product.